A spot for every drink, without the console clutter
Foldable Car Cup Holder: Clips On Anywhere You Need One
$19.99
$33.32
SAVE
40%
The hook slots over a door pocket, console side, or seatback lip. The fold-out tray locks open and holds your drink upright.
Folds to a slim disc that sits flat on the panel
Leather-look finish in two colors. Wipe clean. Sits quietly against your interior.
⭐
Folds Flat
3.94 in closed
🏆
Hook Mount
No tools needed
✨
Wipe-Clean
Leather-look finish
Marcus T.
Wasn't sure it'd fit my older Civic but the hook grabbed right on, no regrets. Love it a lot.
Out of Cup Holders By 9 AM
Foldable Car Cup Holder: Clips On Anywhere You Need One
Holds my phone too
I bought it for drinks but I prop my phone in it every single day now, way more stable than I expected.
Gift for my sister
If you know someone who's always complaining about spilling their drink or having nowhere to put it, get them this. My sister does Uber on weekends and she was always juggling her water bottle and the passenger's coffee, now she just clips one of these to the console side and everything has a spot.
Wasn't sure it'd fit my car
I kept putting it off because I wasn't sure it would fit my older Accord. Finally measured the door pocket like they said and ordered it. Hooks right on, stays put, and now I actually have a place for my coffee.
No more spilled coffee
I used to balance my coffee on the center console every morning and I swear I spilled it at least once a week. Since I clipped this to my door pocket I haven't spilled once. My car actually stays clean now.
Wasn't sure it would fit
Measured my door pocket like they said and it hooked right on, doesn't budge even when I slam the door.
Fits my work life perfectly
I do property showings all day and I'm constantly juggling a coffee, water bottle, and my phone. My car only has two holders and they're always full. I clipped this to my console side and now everything has a spot.
Holds my phone for GPS too
I bought it for drinks but it props my phone up perfectly in landscape so I can see my GPS without holding it. Didn't even know it did that.
Perfect for passengers
If you're the person who always gets stuck holding your drink because the driver took both cupholders, buy this. I clip it on the back of the center console and finally have a spot that's mine. No more balancing a coffee on my lap for the entire drive.
Took the chance
I kept thinking it wouldn't fit my car but I was sick of spills, glad I just ordered it.
Your Console Is Full Before You Even Start the Car.
No More Coffee on the Seat or Bottles on the Floor.
You get in. Two factory cup holders, already full. The passenger has their water bottle. You have coffee.
The extra drink ends up on the seat, wedged between the console and the door, or rolling around the floor the moment you brake. You reach for it at a red light and it tips into the footwell.
It was never a design problem. The car gave you two holders and assumed that was enough. The moment you carry more than one drink, or add a passenger, or keep a water bottle for the gym, the console is full and something ends up loose.
The Foldable Car Cup Holder was built to fix that. A single hook slots over a door pocket, console side, or seatback edge with no tools. The ring and fold-out tray hold your drink upright and within reach. When you are done, it folds flat to a slim disc that sits flush on the panel and never blocks the door or eats console space. Coffee cups, water bottles, cans, to-go fountain cups.
Hooks to any panel edge in seconds.
Holds your drink. Folds flat when done.
Matches your interior, wipes clean.
Why This Holder Fits Your Car
Most clip-on holders are rigid plastic shells that only fit one edge shape, so they wobble on your console or will not hook onto your door at all. This one uses a single steel hook that slots over any lip it can grab (door pocket, console side, seatback edge) and a fold-out tray underneath that takes the cup's weight from below, so the drink sits upright and stable no matter where you mount it.
Why This Holder Fits Your Car
Most clip-on holders are rigid plastic shells that only fit one edge shape, so they wobble on your console or will not hook onto your door at all. This one uses a single steel hook that slots over any lip it can grab (door pocket, console side, seatback edge) and a fold-out tray underneath that takes the cup's weight from below, so the drink sits upright and stable no matter where you mount it.
|
Foldable Cup Hook
|
Rigid Clip Holders
|
|
|---|---|---|
|
Hooks Multiple Edges
|
||
|
Fold-Out Tray Base
|
||
|
Folds Flat When Not In Use
|
||
|
Holds Full Weight
|
||
|
Wipe-Clean Surface
|
||
|
No Tools Required
|
Extra Holders When You Need Them
What drivers report after adding this hook holder
Extra Holders When You Need Them
What drivers report after adding this hook holder
0+ drinks
Mounting Edges It Fits
0%
Drinks Stay Upright
3.94"
Closed (Sits Flat)
The hook slots over door pockets, console sides, and seatback edges. The fold-out tray cradles the cup from underneath so it sits upright and stable. Folds flat to 3.94 inches when not in use. Measure the edge you plan to mount to before ordering.
Your Console Is Full Before You Leave the Driveway
Two factory holders. Your coffee. A water bottle. A passenger's drink. Now your phone is balancing on the dash and something is rolling around on the floor. Every drive starts with negotiating who gets a spot and what goes on the seat, and within ten minutes the console looks like a mess and your coffee is tipping over because you had to wedge it behind the gearshift.
How It Works
1
Hook It
The hook slots over a door pocket, console side, or seatback edge. No tools, no drilling.
2
Fold It Open
The ring and tray lock into place and hold your drink upright.
3
Fold It Flat When Done
Collapses to a slim disc that sits flush on the panel and stays out of the way.
A cup holder right where you can reach it, then gone.
A single hook slots over a door pocket, console side, or seatback edge. No drilling. The ring and fold-out tray hold your drink upright. When you are done, it folds flat to a slim disc that never blocks the door.
-
Hook Slots Over Panel Edge
-
Fold-Out Tray Takes the Weight
-
Folds Flat to 3.94-Inch Disc
-
Holds Cups, Bottles, and Cans
Foldable Car Cup Holder with Hook Questions
How do I know if this will fit my car?
+
It mounts to any edge or pocket lip it can hook over, with enough clearance for the disc to sit flat against the panel. Works on door pockets, console sides, glove box edges, and seatback pockets. Before you order, measure the edge you plan to use and check that nothing blocks the disc when folded. For console-side mounting, your seat should sit at or below the console height.
How does it stay in place when I'm driving?
+
The hook locks over the panel edge and the fold-out tray cradles the cup from underneath, taking the full weight. It stays put through turns and bumps. Holds coffee cups, water bottles, cans, and to-go fountain cups upright and within reach.
What do I do with it when I'm not using it?
+
It folds flat into a slim round disc (3.94 inches closed) that sits flush against the panel. Stays mounted but never blocks the door, bumps your leg, or takes up console space. When you need it again, fold it open and your drink has a spot.
My car's factory cupholders are too small for most drinks. Will this hold bigger bottles?
+
Yes. It holds everyday coffee cups, standard water bottles, cans, and to-go fountain cups. The top ring and fold-out base tray work together to support the cup's weight, so drinks that won't fit your factory holders sit upright here instead.
Can I add one for backseat passengers who have nowhere to put their drinks?
+
Yes. The hook slots over a seatback pocket edge or any panel lip a passenger can reach. Gives backseat riders their own spot for a drink instead of holding it the whole trip or setting it on the floor.